Cut plates

Using our extensive cutting capacities (plasma, laser, water jet and sawing), we can guarantee our clients high quality products with tight tolerances and delivered in a fast and reliable time frame delivery.

plasma
PLASMA

The most economical solution for all forms of stainless steel and nickel alloy pieces.

laser
LASER

The high precision of the laser allows tight tolerances up to 50mm thickness. Also ideal for large quantities of pieces.

waterjet
WATERJET

High-pressure water jet cutting reduces or avoids possible machining. No shape or thickness limitations, cold cutting without heat affected zone (HAZ). Ideal for complex cutting of stainless steels and nickel alloys.

saw
SAWING

Sawing ensures a good cutting perpendicularity for medium and thick pieces and flats, without a heat affected zone (HAZ).

Compare tolerances according their cutting processes

Plate thickness (mm) SAW
L ≤ 3000 mm L > 3000 mm
1 → 5 Length
0 / + 4 mm

Width
0 / + 4 mm
Length
0 / + 6 mm

Width
0 / + 4 mm
6 → 10
11 → 15
16 → 20
21 → 30
31 → 40
41 → 50
51 → 60
61 → 80
81 → 100
101 → 110
111 → 130
131 → 139
140 → 150
–
Plate
thickness
(mm)
LASER
L ≤ 300 mm L > 300 mm
L ≤ 1000 mm
L > 1000 mm
1 → 5 ± 0,3 mm ± 0,5 mm ± 0,6 mm
6 → 10
11 → 15 ± 0,75 mm ± 1 mm ± 1,25 mm
16 → 20
21 → 30 ± 1 mm ± 1,25 mm ± 1,5 mm
31 → 40 ± 2,5 mm ± 3 mm ± 3,5 mm
41 → 50
51 → 60 N.A.
61 → 80
81 → 100
101 → 110
111 → 130
131 → 139
140 → 150
■ Minimum hole diameter: 0,4 x thickness
Plate
thickness
(mm)
WATERJET
L ≤ 1000 mm L > 1000
L ≤ 3000
L > 3000
L ≤ 6000
Basic Normal Fine
1 → 5 ± 0,8 mm ± 0,6 mm ± 0,4 mm ± 2 mm ± 3 mm
6 → 10 ± 1 mm ± 0,7 mm ± 0,4 mm
11 → 15
16 → 20 ± 1,5 mm ± 1 mm ± 0,5 mm
21 → 30
31 → 40
41 → 50 ± 2 mm ± 1,5 mm ± 1 mm ± 2,5 mm ± 3,5 mm
51 → 60
61 → 80
81 → 100 N.A. ± 2,5 mm ± 1,5 mm ± 3,5 mm ± 4,5 mm
101 → 110 N.A. ± 3,5 mm ± 2,5 mm ± 4,5 mm ± 5,5 mm
111 → 130
131 → 139 N.A. ± 5 mm ± 4 mm ± 6 mm ± 7 mm
140 → 150
■ Taper included (0,2 mm per each 10 mm thick)
■ Minimum hole diameter: 0,4 x thickness
Plate
thickness
(mm)
PLASMA
Upper surface
without taper Δ
Potential
taper □
Minimum overlength rough size
versus finished size ◊
1 → 5 External cut
0 / + 3 mm

Internal cut
-3 / 0 mm
3 mm per side /
Total 6 mm
5 mm per side :
+ 10 mm total
6 → 10
11 → 15
16 → 20
21 → 30
31 → 40
41 → 50
51 → 60
61 → 80 External cut
0 / + 5 mm

Internal cut
– 5 mm / 0
6 mm per side /
Total 12 mm
< 80 mm → 6 mm per side :
+ 12 mm total
81 → 100 < 100 mm → 7 mm par côté :
+ 14 mm total
101 → 110 ≤ 110 mm → 10 mm par côté :
+ 20 mm total
111 → 130 External cut
0 / + 8 mm

Internal cut
– 8 mm / 0
External cut
10 mm per side /
Total 20 mm.
< 140 mm → 12 mm per side
+ 24 mm total
131 → 139
140 → 150 ≥ 140 mm → 15 mm per side :
+ 30 mm total
Δ That which can be measured with a measuring tape, on surface
□ Could be partially negative above thickness 100 mm
◊ Rough size (theoretical cut), finished size (machined): Necessary for the client to eliminate the HAZ and the irregular taper
As a precaution, always inform the finished sizes for thickness above 100 mm
■ Minimum hole diameter: 1,5 x thickness (always ≥ 20 mm)
■ Minimum ring wall: 0,5 x thickness (always ≥ 30 mm)

Général

  • No flatness or straightness guarantee on cut pieces, unless prior agreement
  • Flatness tolerances according standards, only apply to full plates
  • Hot rolled plate thickness tolerances: ASTM A480 & ISO 18286
  • Surface according to EN 10163-2 class B3 (Scratches, grinded areas)
  • Cut edges, deburred
  • By default, handwritten felt-tip marking “Grade, heat number”. Laser marking when laser cut
Copyright © JACQUET International -
Legal notice